Analysis of methods of hardening and restoration of worn parts

Authors

DOI:

https://doi.org/10.24193/subbeng.2024.1.14

Keywords:

wear resistance, restoration, surfacing

Abstract

The restoration of worn parts is an important aspect in the field of machine repair and maintenance of machinery. It allows you to significantly reduce repair costs and is a priority issue in the development of a machine maintenance and repair system. The main causes of performance loss products are abrasive wear, fatigue breakdowns, corrosion and other types of destruction. When choosing a recovery method, the type of coupling, types of friction and operating conditions of the machines are important factors. An increase in wear resistance can be achieved by changing the chemical composition of the material, mechanical influences and the application of wear-resistant coatings.

References

D.A. Iskakova, A.Zh. Kasenov, D.A. Magellan, Comparison and analysis of the technological process of repair of pipe fittings, "XXIV Satpayev readings" International Scientific Conference, 19 April 2024, Pavlodar, Kazakhstan, pp. 23-30.

D.A. Magellan, D.A. Iskakova, J.K. Musina, Investigation of the influence of surfacing modes on wear resistance, "XXIV Satpayev readings" International Scientific Conference, 19 April 2024, Pavlodar, Kazakhstan, pp. 38-41.

D.A. Iskakova, A.J. Kasenov, A.U. Kabulova, The study of tribotechnical characteristics of surfaces by various processing methods. Theoretical and practical aspects of the development of modern science [Electronic resource] / SORoS Publishing House, Scientific Publishing Center "World of Science"–The electron. text. data. (1.70 Mb.).–Neftekamsk: Scientific Publishing Center "World of Science", 2023. pp. 18-26.

W. Feng, Research on microstructure of the auto-restoration layer of worn surface of metals, Materials Science and Engineering: A, 399(1–2), 2005. pp. 271-275.

V.I. Chernoivanov, Organizatsiya i tekhnologiya vosstanovleniya detaley mashin / Chernoivanov V. I. – M. : Agropromizdat, 1989. – 334 p.

Z.H. Wu, Z.X. Li, Q.Y. Zhang, Y. Jiang, Z.G. Liu, Y.D. Yuan, Y. Xue, X.N. Wang, Effect of microstructure on wear resistance during high temperature carburization heat treatment of heavy-duty gear steel, Materials Today Communications, Vol. 40, 2024, 109486.

J. Li, Y. Jiao, C. Xu, L. Zhang, Q. Li, L. Ren, Study on the multi-environmental wear resistance of a shell-imitating multilayer multimaterial composite carbon fiber, Tribology International, Vol. 198, 2024, 109930.

I.I. Drakonov, Innovative methods of hardening and restoration of machine parts / I.I. Dragunov, V.V. Evenko // New materials and technologies in mechanical engineering. – 2022. – No. 36. – pp. 14-18.

E.V. Treshcheva, Analysis of the features of coating by gas thermal spraying in the processes of restoration and hardening of parts of transport and technological machines / E. V. Treshcheva // Students of Russia: Century XXI Proceedings of the VI All-Russian International Scientific and Practical Conference: in 4 parts, Orel, 13 December, 2018. Vol. Part 4. – Orel: N.V. Parakhin Oryol State Agrarian University, 2019. – pp. 370-378.

Y.M. Kuskov, I.L. Bogaychuk, N.P. Shevchenko, M.A. Fesenko, Electroslag surfacing of 110G13L steel using various types of surfacing material, Welding International, 2021, DOI 10.1080/09507116.2021.1945321.

V.G. Burov, A.A. Bataev, Kh.M. Rakhimyanov, D.O. Mul, Technology of Strengthening Steel Details by Surfacing Composite Coatings, IOP Conference Series: Materials Science and Engineering, 7, Kemerovo, Russia, September 23-25, 2015.

Downloads

Published

2024-10-28

How to Cite

DINARA, I., ASYLBEK, K. ., DARIYA, M., & KORKA, Z.-I. (2024). Analysis of methods of hardening and restoration of worn parts. Studia Universitatis Babeș-Bolyai Engineering, 69(1), 137–148. https://doi.org/10.24193/subbeng.2024.1.14

Issue

Section

Articles