P2P (BILATERAL) COMMUNICATION BETWEEN NodeMcu ESP8266 BOARDS USING ARDUINO IDE
DOI:
https://doi.org/10.24193/subbphys.2020.08Keywords:
Bilateral communication, NodeMcu ESP8266, Arduino.Abstract
Bilateral communication between the boards NodeMcu ESP826 is achieved using the WI FI capabilities of these devices and particularly code based on Arduino IDE. The system is used to control servos, DC motors or led. The duplex communication allows feedback action between sender and receiver. Real time feedback is obtained by particularly connection of the servo to the board.References
M. Todica, Feedback control of DC motors with long range HC 12 Transceiver and Arduino, Studia Univ. “Babes-Bolyai”, Physica, Vol. 64 (LXIV), 1-2, 2019, pp. 91-100 DOI:10.24193/subbphys.2019.10
M. Todica, Software feedback with HC 12 transceivers and Arduino Research Gate DOI:10.13140/RG.2.2.24560.61444
Arduino Website (www.arduino.cc/en/Guide/ Introduction)
M. Todica, Servo and RGB led feedback with smartphone and Blynk, Research Gate, DOI:10.13140/RG.2.2.23512.08960
http://dr-iguana.com/prj_TPro_SG90_2/
T. A. Antal, Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Vol. 60, Issue I, March (2017)
S. D. Anghel, Bazele Electronicii analogice si digitale, Presa Universitară Clujeană, Cluj-Napoca, 2007, ISBN: 978-973-610-554-8
Rui Santos, Getting Started with ESP-NOW (ESP8266 NodeMCU with Arduino IDE), https://randomnerdtutorials.com/esp-now-esp8266-nodemcu-arduino-ide/
Rui Santos, Installing ESP8266 Board in Arduino IDE (Windows, Mac OS X, Linux), https://randomnerdtutorials.com/how-to-install-esp8266-board-arduino-ide/
Rui Santos, Get ESP32/ESP8266 MAC Address and Change It (Arduino IDE) https://randomnerdtutorials.com/get-change-esp32-esp8266-mac-address-arduino/
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Studia Universitatis Babeș-Bolyai Physica
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
